How To Repair Torch Down Gutters

The images show all the steps nosotros had to accept to ensure that this roof would not leak:

Scupper smeared total of tar. Still it was withal leaking

This is a roof in Queens that was done by a roofer living in Queens. We establish that he did non know how to torch seams together. It was a battle trying to repair his mess.

These are images of all the repairs nosotros did on a roof in Queens

The transition from the rubber membrane to the scupper was not completed

We had to remove all the tar and brand a new transition to the scupper

After removing the tar from the scupper nosotros were able to make the new transition with condom

Parapet walls with one-half pipe or coping tiles are non piece of cake exercise the flashing against. This is especially true when everyone accept smeared tar under the lip of the tile. What nosotros did in this example is nosotros removed the ribs that forms the joint betwixt two tiles to get a smooth surface

Nosotros removed the ribs on the half-round clay caps to get a smooth surface to install the rubber membrane

After removing the ribs, we and then were able to install a safe membrane straight on the clay caps downwards to the roof

After removing the ribs on the parapet wall nosotros then installed the rubber membrane to brand a transition to the roof

Nosotros as well had to brand numerous patches on the roof.

We had to install an additional membrane in front of the scupper

Repairing the flashing confronting the parapet wall

Removing excess tar and roofing materials to get a smooth transition from the parapet wall to the roof

The transition from the metal cap that covers the parapet wall was simply tar.

The metallic cap butted upwardly to the slate roof. Then someone used tar to make that transition. Nosotros removed the cracked tar and installed a slice of rubber membrane

We installed a rubber membrane over the transition expanse from the metal cap to the slate roof

The chimney was not properly flashed to the roof. We installed new safety membrane and fixed the flashing

The transition form the metal cap to the chimney. We covered the chimney with a membrane and fabricated the transition to the metal cap

After installing the flashing membrane, nosotros then covered the entire chimney with a prophylactic membrane.

The joint where the two metal caps meet also had to exist covered with a rubber membrane

The transition where the two metallic caps meet on the parapet wall was covered with a rubber membrane

This is what the roof ended upwardly looking. Information technology took nearly five hours for all the repairs

This is what the roof repairs look like on a roof in Queens after we were done. The vent pipe, skylight, chimney, scupper and parapet wall was all redone with a Modified Bitumen Torch Down Prophylactic membrane

Delight write a Review on Roof Leak Repairs at the bottom of the folio

Source: https://flatroofdoc.com/queens-ny-flat-roof-repair-fixing-others-mess/

Posted by: dickinsonlesse1952.blogspot.com

Share this post